JVM Uptime Test
This test helps track whether a scheduled reboot of the JVM has occurred or not.
Target of the test : An Oracle 9i Application Server
Agent deploying the test : An internal/remote agent
Outputs of the test : One set of results for the server being monitored.
Parameter | Description |
---|---|
Test Period |
How often should the test be executed. |
Host |
The IP address of the host for which this test is to be configured. |
Port |
Refers to the port at which the specified host listens to. |
Mode |
This test can extract metrics from the Java application using either of the following mechanisms:
To configure the test to use SNMP, select the SNMP option. On the other hand, choose the JMX option to configure the test to use JMX instead. By default, the JMX option is chosen here. |
JMX Remote Port |
This parameter appears only if the Mode is set to JMX. Here, specify the port at which the JMX listens for requests from remote hosts. Ensure that you specify the same port that you configured in the management.properties file in the <JAVA_Home>\jre\lib\management folder used by the target application (refer to the Java Applications Monitoring Model for details). |
User, Password, |
These parameters appear only if the Mode is set to JMX. If JMX requires authentication only (but no security), then ensure that the User and Password parameters are configured with the credentials of a user with read-write access to JMX. To know how to create this user, refer to the Java Applications Monitoring Model. Confirm the password by retyping it in the Confirm Password text box. |
JNDIName |
This parameter appears only if the Mode is set to JMX. The JNDIName is a lookup name for connecting to the JMX connector. By default, this is jmxrmi. If you have registered the JMX connector in the RMI registery using a different lookup name, then you can change this default value to reflect the same. |
Provider |
This parameter appears only if the Mode is set to JMX. This test uses a JMX Provider to access the MBean attributes of the target Java application and collect metrics. Specify the package name of this JMX Provider here. By default, this is set to com.sun.jmx.remote.protocol. |
Timeout |
Specify the duration (in seconds) for which this test should wait for a response from the target Java application. If there is no response from the target beyond the configured duration, the test will timeout. By default, this is set to 240 seconds if the mode is JMX, and 10 seconds if the mode is SNMP. |
SNMPPort |
This parameter appears only if the Mode is set to SNMP. Here specify the port number through which the server exposes its SNMP MIB. Ensure that you specify the same port you configured in the management.properties file in the <JAVA_HOME>\jre\lib\management folder used by the target application (refer to the Java Applications Monitoring Model for details). |
SNMPVersion |
This parameter appears only if the Mode is set to SNMP. By default, the eG agent supports SNMP version 1. Accordingly, the default selection in the SNMPversion list is v1. However, if a different SNMP framework is in use in your environment, say SNMP v2 or v3, then select the corresponding option from this list. |
SNMPCommunity |
This parameter appears only if the Mode is set to SNMP. The SNMP community name that the test uses to communicate with the firewall. This parameter is specific to SNMP v1 and v2 only. Therefore, if the SNMPVersion chosen is v3, then this parameter will not appear. |
UserName |
This parameter appears only when v3 is selected as the SNMPVersion. SNMP version 3 (SNMPv3) is an extensible SNMP Framework which supplements the SNMPv2 Framework, by additionally supporting message security, access control, and remote SNMP configuration capabilities. To extract performance statistics from the MIB using the highly secure SNMP v3 protocol, the eG agent has to be configured with the required access privileges – in other words, the eG agent should connect to the MIB using the credentials of a user with access permissions to be MIB. Therefore, specify the name of such a user against this parameter. |
Context |
This parameter appears only when v3 is selected as the SNMPVersion. An SNMP context is a collection of management information accessible by an SNMP entity. An item of management information may exist in more than one context and an SNMP entity potentially has access to many contexts. A context is identified by the SNMPEngineID value of the entity hosting the management information (also called a contextEngineID) and a context name that identifies the specific context (also called a contextName). If the Username provided is associated with a context name, then the eG agent will be able to poll the MIB and collect metrics only if it is configured with the context name as well. In such cases therefore, specify the context name of the UserName in the Context text box. By default, this parameter is set to none. |
AuthPass |
Specify the password that corresponds to the above-mentioned UserName. This parameter once again appears only if the SNMPversion selected is v3. |
Confirm Password |
Confirm the AuthPass by retyping it here. |
AuthType |
This parameter too appears only if v3 is selected as the SNMPVersion. From the AuthType list box, choose the authentication algorithm using which SNMP v3 converts the specified username and password into a 32-bit format to ensure security of SNMP transactions. You can choose between the following options:
|
EncryptFlag |
This flag appears only when v3 is selected as the SNMPVersion. By default, the eG agent does not encrypt SNMP requests. Accordingly, the this flag is set to No by default. To ensure that SNMP requests sent by the eG agent are encrypted, select the Yes option. |
EncryptType |
If this EncryptFlag is set to Yes, then you will have to mention the encryption type by selecting an option from the EncryptType list. SNMP v3 supports the following encryption types:
|
EncryptPassword |
Specify the encryption password here. |
Confirm Password |
Confirm the encryption password by retyping it here. |
Data Over TCP |
This parameter appears only if the Mode is set to SNMP. By default, in an IT environment, all data transmission occurs over UDP. Some environments however, may be specifically configured to offload a fraction of the data traffic – for instance, certain types of data traffic or traffic pertaining to specific components – to other protocols like TCP, so as to prevent UDP overloads. In such environments, you can instruct the eG agent to conduct the SNMP data traffic related to the monitored target over TCP (and not UDP). For this, set this flag to Yes. By default, this flag is set to No. |
Measurement | Description | Measurement Unit | Interpretation | ||||||
---|---|---|---|---|---|---|---|---|---|
Has the JVM been restarted? |
Indicates whether or not the JVM has restarted during the last measurement period. |
|
If the value of this measure is No, it indicates that the JVM has not restarted. The value Yes on the other hand implies that the JVM has indeed restarted. The numeric values that correspond to the reboot states discussed above are listed in the table below:
Note: By default, this measure reports the value Yes or No to indicate whether a JVM has restarted. The graph of this measure however, represents the same using the numeric equivalents – 0 or 1. |
||||||
Uptime during the last measure period |
Indicates the time period that the JVM has been up since the last time this test ran. |
Secs |
If the JVM has not been restarted during the last measurement period and the agent has been running continuously, this value will be equal to the measurement period. If the JVM was restarted during the last measurement period, this value will be less than the measurement period of the test. For example, if the measurement period is 300 secs, and if the JVM was restarted 120 secs back, this metric will report a value of 120 seconds. The accuracy of this metric is dependent on the measurement period – the smaller the measurement period, greater the accuracy. |
||||||
Total uptime of the JVM |
Indicates the total time that the JVM has been up since its last reboot. |
|
This measure displays the number of years, months, days, hours, minutes and seconds since the last reboot. Administrators may wish to be alerted if a JVM has been running without a reboot for a very long period. Setting a threshold for this metric allows administrators to determine such conditions. |