Feature Memory Usage Test

Fractions of the global memory are allocated to each feature that is operational on the ADC appliance. Using this test, you can track the memory usage of each feature and accurately identify those features that are memory-intensive. Memory allocations to features can be fine-tuned based on the usage results reported by this test.

Target of the test : An ADC VPX/MPX

Agent deploying the test : A remote agent

Outputs of the test : One set of results for each feature configured on the ADC appliance being monitored.

Configurable parameters for the test
Parameter Description

Test Period

How often should the test be executed.


The IP address of the host for which the test is being configured.

NetScaler Username and NetScaler Password

To monitor a ADC device, the eG agent should be configured with the credentials of a user with read-only privileges to the target ADC device. Specify the credentials of such a user in the NetScaler Username and NetScaler Password text boxes.

Confirm Password

Confirm the ADC Password by retyping it here.


The eG agent collects performance metrics by invoking NITRO (ADC Interface Through Restful interfaces and Objects) APIs on the target ADC device. Typically, the NITRO APIs can be invoked through the HTTP or the HTTPS mode. By default, the eG agent invokes the NITRO APIs using the HTTPS mode. This is why, the SSL flag is set to Yes by default. If the target ADC device is not SSL-enabled, then the NITRO APIs can be accessed through the HTTP mode only. In this case, set the SSL flag to No.

Measurements made by the test
Measurement Description Measurement Unit Interpretation

ADC memory available for use

Indicates the amount of ADC memory currently allocated for this feature.



ADC memory used

Indicates the percentage of allocated memory currently used by this feature.


A value close to 100% is a cause for concern as it indicates excessive memory consumption by a feature. You can compare the value of this measure across features to identify which feature memory-hungry. Memory allocation to such features can be increased if found necessary.

Memory allocation failure

Indicates the amount of memory that failed during allocation to this feature.


Allocation failures can occur owing to a memory crunch.