Page File - VM Test

When the load imposed by applications and services running on a server nears the amount of installed RAM, additional storage is necessary. The page file serves as the temporary store on disk for memory that cannot be accommodated in the physical RAM. Since it is frequently accessed for storing and retrieving data that is needed for virtual memory access by application, the location and sizing of the page files can have a critical impact on server's performance. Ideally, the server operating system and the page file should be available on different drives for optimal performance. Splitting the page file across different drives can improve performance further.

A rule of thumb in sizing the page file is to set the maximum size of the page file to 1.5 times the available RAM. While this works well for systems with smaller physical memory, for other systems, the optimal page file size has to be determined based on experience using the system and studying the typical workload.

This test tracks the usage of each of the page files on a Windows VM. Note that this test is available for VMs running on Windows servers only.

This test is disabled by default. To enable the test, go to the enable / disable tests page using the menu sequence : Agents -> Tests -> Enable/Disable, pick Citrix XenServer/ XenServer-VDI as the desired Component type, set Performance as the Test type, choose the test from the disabled tests list, and click on the < button to move the test to the ENABLED TESTS list. Finally, click the Update button.

Target of the test : A Citrix XenServer/ XenServer-VDI

Agent executing the test : An internal agent

Output of the test : one set of results for each page file on the Windows server

  1. Test period - How often should the test be executed
  2. Host - The host for which the test is to be configured.
  3. port - The port at which the specified host listens. By default, this is NULL.
  4. XEN user - To enable the eG agent to connect to the XenServer API for collecting statistics of interest, this test should login to the XenServer as a root user. Provide the name of the root user in the XEN USER text box. Root user privileges are mandatory when monitoring a XenServer 5.5 (or below). However, if you are monitoring XenServer 5.6 (or above) and you prefer not to expose the credentials of the root user, then, you have the option of configuring a user with pool-admin privileges as the xen user. If you do not want to expose the credentials of a root/pool-admin user, then you can configure the tests with the credentials of a xen user with Read-only privileges to the XenServer. However, if this is done, then the Xen Uptime test will not run, and the Xen CPU and Xen Memory tests will not be able to report metrics for the control domain descriptor. To avoid such an outcome, do the following before attempting to configure the eG tests with a xen user who has Read-only privileges to the XenServer:

    • Modify the target XenServer’s configuration in the eG Enterprise system. For this, follow the Infrastructure -> Components -> Add/Modify menu sequence, pick Citrix XenServer as the Component type, and click the Modify button corresponding to the target XenServer.
    • In the modify component details page that then appears, make sure that the os is set to Xen and the Mode is set to ssh.
    • Then, in the same page, proceed to provide the User and Password of a user who has the right to connect to the XenServer console via SSH.
    • Then, click the Update button to save the changes.

    Once this is done, you can configure the eG tests with the credentials of a xen user with Read-only privileges.

  5. xen password - The password of the specified xen user needs to be mentioned here.
  6. confirm password - Confirm the xen password by retyping it here.
  7. ssl - By default, the Xen Server is not SSL-enabled. This indicates that by default, the eG agent communicates with the XenServer using HTTP. Accordingly, the ssl flag is set to No by default. If you configure the XenServer to use SSL, then make sure that the SSL flag is set to Yes, so that the eG agent communicates with the XenServer using HTTPS. Note that a default SSL certificate comes bundled with every XenServer installation. If you want the eG agent to use this default certificate for communicating with an SSL-enabled XenServer, then no additional configuration is required. However, if you do not want to use the default certificate, then you can generate a self-signed certificate for use by the XenServer. In such a case, you need to explicitly follow the broad steps given below to enable the eG agent to communicate with the XenServer via HTTPS:

    • Obtain the server-certificate for the XenServer
    • Import the server-certificate into the local certificate store of the eG agent

    For a detailed discussion on each of these steps, refer to the Troubleshooting section of this document.

  8. INSIDE VIEW USING - By default, this test communicates with every VM remotely and extracts “inside view” metrics. Therefore, by default, the INSIDE VIEW USING flag is set to Remote connection to VM (Windows).

    Typically, to establish this remote connection with Windows VMs in particular, eG Enterprise requires that the eG agent be configured with domain administrator privileges. In high-security environments, where the IT staff might have reservations about exposing the credentials of their domain administrators, this approach to extracting “inside view” metrics might not be preferred. In such environments therefore, eG Enterprise provides administrators the option to deploy a piece of software called the eG VM Agent on every Windows VM; this VM agent allows the eG agent to collect “inside view” metrics from the Windows VMs without domain administrator rights. Refer to Configuring Windows Virtual Machines to Support the eG Agent’s Inside View Using the eG VM Agent for more details on the eG VM Agent. To ensure that the “inside view” of Windows VMs is obtained using the eG VM Agent, set the INSIDE VIEW USING flag to eG VM Agent (Windows). Once this is done, you can set the DOMAIN, ADMIN USER, and ADMIN PASSWORD parameters to none.

  9. DOMAIN, ADMIN USER, ADMIN PASSWORD, and CONFIRM PASSWORD - By default, this test connects to each virtual guest remotely and attempts to collect “inside view” metrics. In order to obtain a remote connection, the test must be configured with user privileges that allow remote communication with the virtual guests. The first step towards this is to specify the DOMAIN within which the virtual guests reside. The ADMIN USER and ADMIN PASSWORD will change according to the DOMAIN specification. Discussed below are the different values that the DOMAIN parameter can take, and how they impact the ADMIN USER and ADMIN PASSWORD specifications:

    • If the VMs belong to a single domain : If the guests belong to a specific domain, then specify the name of that domain against the DOMAIN parameter. In this case, any administrative user in that domain will have remote access to all the virtual guests. Therefore, an administrator account in the given domain can be provided in the ADMIN USER field and the corresponding password in the ADMIN PASSWORD field. Confirm the password by retyping it in the CONFIRM PASSWORD text box.
    • If the guests do not belong to any domain (as in the case of Linux guests) : In this case, specify "none" in the DOMAIN field, and specify a local administrator account name in the ADMIN USER below.

      Prior to this, you need to ensure that the same local administrator account is available or is explicitly created on each of the virtual machines to be monitored. Then, proceed to provide the password of the ADMIN USER against ADMIN PASSWORD, and confirm the password by retyping it in the CONFIRM PASSWORD text box.

      If key-based authentication is implemented between the eG agent and the SSH daemon of a Linux guest, then, in the ADMIN USER text box, enter the name of the user whose <USER_HOME_DIR> (on that Linux guest) contains a .ssh directory with the public key file named authorized_keys. The ADMIN PASSWORD in this case will be the passphrase of the public key; the default public key file that is bundled with the eG agent takes the password eginnovations. Specify this as the ADMIN PASSWORD if you are using the default private/public key pair that is bundled with the eG agent to implement key-based authentication. On the other hand, if you are generating a new public/private key pair for this purpose, then use the passphrase that you provide while generating the pair. For the detailed procedure on Implementing Key-based Authentication refer to Troubleshooting the Failure of the eG Remote Agent to Connect to or Report Measures for Linux Guests.

    • If the guests belong to different domains - In this case, you might want to provide multiple domain names. If this is done, then, to access the guests in every configured domain, the test should be configured with the required user privileges; this implies that along with multiple DOMAIN names, multiple ADMIN USER names and ADMIN PASSWORDs would also have to be provided. To help administrators provide these user details quickly and easily, the eG administrative interface embeds a special configuration page.

      To access this page, simply click on the Click here hyperlink that appears just above the parameters of this test in the test configuration page. To know how to use the special page, refer to Configuring Users for VM Monitoring.

    • If the INSIDE VIEW USING flag is set to ‘eG VM Agent (Windows)’ - In this case, the inside view can be obtained without domain administrator privileges. Therefore, set the domain, admin user, and admin password parameters to none.

  10. IGNORE VMS INSIDE VIEW - Administrators of some high security XenServer environments might not have permissions to internally monitor one/more VMs. The eG agent can be configured to not obtain the 'inside view' of such ‘inaccessible’ VMs using the IGNORE VMS INSIDE VIEW parameter. Against this parameter, you can provide a comma-separated list of VM names, or VM name patterns, for which the inside view need not be obtained. For instance, your IGNORE VMS INSIDE VIEW specification can be: *xp,*lin*,win*,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside view of all VMs on a XenServer host by default.

    Note:

    While performing VM discovery, the eG agent will not discover the operating system of the VMs configured in the IGNORE VMS INSIDE VIEW text box.

  11. EXCLUDE VMS - Administrators of some virtualized environments may not want to monitor some of their less-critical VMs - for instance, VM templates - both from 'outside' and from 'inside'. The eG agent in this case can be configured to completely exclude such VMs from its monitoring purview. To achieve this, provide a comma-separated list of VMs to be excluded from monitoring in the EXCLUDE VMS text box. Instead of VMs, VM name patterns can also be provided here in a comma-separated list. For example, your EXCLUDE VMS specification can be: *xp,*lin*,win*,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside and outside views of all VMs on a virtual host by default. By providing a comma-separated list of VMs/VM name patterns in the EXCLUDE VMS text box, you can make sure the eG agent stops collecting 'inside' and 'outside' view metrics for a configured set of VMs.
  12. IGNORE WINNT - By default, the eG agent does not support the inside view for VMs executing on Windows NT operating systems. Accordingly, the IGNORE WINNT flag is set to Yes by default.
  13. REPORT BY USER - While monitoring a Citrix XenServer, the REPORT BY USER flag is set to No by default, indicating that by default, the guest operating systems on the XenServer are identified using the hostname specified in the operating system. On the other hand, while monitoring a Citrix XenServer - VDI, this flag is set to Yes by default; this implies that in case of the XenServer VDI model, by default, the desktops will be identified using the login of the user who is accessing them. In other words, in VDI environments, this test will, by default, report measures for every username_on_virtualmachinename.

  14. REPORT POWERED OS - This flag becomes relevant only if the report by user flag is set to ‘Yes’.

    If the report powered os flag is set to Yes (which is the default setting), then this test will report measures for even those VMs that do not have any users logged in currently. Such guests will be identified by their virtualmachine name and not by the username_on_virtualmachinename. On the other hand, if the report powered os flag is set to No, then this test will not report measures for those VMs to which no users are logged in currently.  

  15. REPORTTOTAL - Set this flag to Yes if you want the test to report total page file usage - i.e., the aggregate usage across multiple page files. In this case therefore, a Total descriptor will newly appear for this test in the eG monitoring console.
  16. REPORTTOTALONLY - If both the REPORTTOTAL and REPORTTOTALONLY flags are set to Yes, then the test will report only the aggregate usage across multiple page files - in other words, the test will report values for the Total descriptor only. Likewise, if the REPORTTOTAL flag is set to No, and the REPORTTOTALONLY flag is set to Yes, then again, the test will report current usage for the Total descriptor only. However, if both the REPORTTOTAL and REPORTTOTALONLY flags are set to No, then the test will report individual usages only. Also, if the REPORTTOTAL flag is set to Yes and the REPORTTOTALONLY flag is set to No, then both the individual and Total usages will be reported.
Measurements made by the test
Measurement Description Measurement Unit Interpretation

Current usage

Indicates the current usage of a page file.

Percent

This metric should be less than 90%. If the page file does not have additional space, additional users/processes cannot be supported and system performance will suffer. To improve performance, consider resizing the page file. Microsoft Windows allows a minimum and maximum size of the page file to be specified. If the system has sufficient disk space, consider setting the page file to start out at the maximum size (by using the same value for the minimum and maximum sizes), so that system resources are not spent growing the page file size when there is a virtual memory shortage.