System Details - VM Test

This test collects various metrics pertaining to the CPU and memory usage of every processor supported by a guest. The details of this test are as follows:

Target of the test : A XenServer host

Agent deploying the test : An internal/remote agent

Outputs of the test : One set of results for every combination of virtual_guest:disk_partition

Configurable parameters for the test

  1. Test period - How often should the test be executed
  2. Host - The host for which the test is to be configured.
  3. port - The port at which the specified host listens. By default, this is NULL.
  4. XEN user - To enable the eG agent to connect to the XenServer API for collecting statistics of interest, this test should login to the XenServer as a root user. Provide the name of the root user in the XEN USER text box. Root user privileges are mandatory when monitoring a XenServer 5.5 (or below). However, if you are monitoring XenServer 5.6 (or above) and you prefer not to expose the credentials of the root user, then, you have the option of configuring a user with pool-admin privileges as the xen user. If you do not want to expose the credentials of a root/pool-admin user, then you can configure the tests with the credentials of a xen user with Read-only privileges to the XenServer. However, if this is done, then the Xen Uptime test will not run, and the Xen CPU and Xen Memory tests will not be able to report metrics for the control domain descriptor. To avoid such an outcome, do the following before attempting to configure the eG tests with a xen user who has Read-only privileges to the XenServer:

    • Modify the target XenServer’s configuration in the eG Enterprise system. For this, follow the Infrastructure -> Components -> Add/Modify menu sequence, pick Citrix XenServer as the Component type, and click the Modify button corresponding to the target XenServer.
    • In the modify component details page that then appears, make sure that the os is set to Xen and the Mode is set to ssh.
    • Then, in the same page, proceed to provide the User and Password of a user who has the right to connect to the XenServer console via SSH.
    • Then, click the Update button to save the changes.

    Once this is done, you can configure the eG tests with the credentials of a xen user with Read-only privileges.

  5. xen password - The password of the specified xen user needs to be mentioned here.
  6. confirm password - Confirm the xen password by retyping it here.
  7. ssl - By default, the Xen Server is not SSL-enabled. This indicates that by default, the eG agent communicates with the XenServer using HTTP. Accordingly, the ssl flag is set to No by default. If you configure the XenServer to use SSL, then make sure that the SSL flag is set to Yes, so that the eG agent communicates with the XenServer using HTTPS. Note that a default SSL certificate comes bundled with every XenServer installation. If you want the eG agent to use this default certificate for communicating with an SSL-enabled XenServer, then no additional configuration is required. However, if you do not want to use the default certificate, then you can generate a self-signed certificate for use by the XenServer. In such a case, you need to explicitly follow the broad steps given below to enable the eG agent to communicate with the XenServer via HTTPS:

    • Obtain the server-certificate for the XenServer
    • Import the server-certificate into the local certificate store of the eG agent

    For a detailed discussion on each of these steps, refer to the Troubleshooting section of this document.

  8. INSIDE VIEW USING - By default, this test communicates with every VM remotely and extracts “inside view” metrics. Therefore, by default, the INSIDE VIEW USING flag is set to Remote connection to VM (Windows).

    Typically, to establish this remote connection with Windows VMs in particular, eG Enterprise requires that the eG agent be configured with domain administrator privileges. In high-security environments, where the IT staff might have reservations about exposing the credentials of their domain administrators, this approach to extracting “inside view” metrics might not be preferred. In such environments therefore, eG Enterprise provides administrators the option to deploy a piece of software called the eG VM Agent on every Windows VM; this VM agent allows the eG agent to collect “inside view” metrics from the Windows VMs without domain administrator rights. Refer to Configuring Windows Virtual Machines to Support the eG Agent’s Inside View Using the eG VM Agent for more details on the eG VM Agent. To ensure that the “inside view” of Windows VMs is obtained using the eG VM Agent, set the INSIDE VIEW USING flag to eG VM Agent (Windows). Once this is done, you can set the DOMAIN, ADMIN USER, and ADMIN PASSWORD parameters to none.

  9. DOMAIN, ADMIN USER, ADMIN PASSWORD, and CONFIRM PASSWORD - By default, this test connects to each virtual guest remotely and attempts to collect “inside view” metrics. In order to obtain a remote connection, the test must be configured with user privileges that allow remote communication with the virtual guests. The first step towards this is to specify the DOMAIN within which the virtual guests reside. The ADMIN USER and ADMIN PASSWORD will change according to the DOMAIN specification. Discussed below are the different values that the DOMAIN parameter can take, and how they impact the ADMIN USER and ADMIN PASSWORD specifications:

    • If the VMs belong to a single domain : If the guests belong to a specific domain, then specify the name of that domain against the DOMAIN parameter. In this case, any administrative user in that domain will have remote access to all the virtual guests. Therefore, an administrator account in the given domain can be provided in the ADMIN USER field and the corresponding password in the ADMIN PASSWORD field. Confirm the password by retyping it in the CONFIRM PASSWORD text box.
    • If the guests do not belong to any domain (as in the case of Linux guests) : In this case, specify "none" in the DOMAIN field, and specify a local administrator account name in the ADMIN USER below.

      Prior to this, you need to ensure that the same local administrator account is available or is explicitly created on each of the virtual machines to be monitored. Then, proceed to provide the password of the ADMIN USER against ADMIN PASSWORD, and confirm the password by retyping it in the CONFIRM PASSWORD text box.

      If key-based authentication is implemented between the eG agent and the SSH daemon of a Linux guest, then, in the ADMIN USER text box, enter the name of the user whose <USER_HOME_DIR> (on that Linux guest) contains a .ssh directory with the public key file named authorized_keys. The ADMIN PASSWORD in this case will be the passphrase of the public key; the default public key file that is bundled with the eG agent takes the password eginnovations. Specify this as the ADMIN PASSWORD if you are using the default private/public key pair that is bundled with the eG agent to implement key-based authentication. On the other hand, if you are generating a new public/private key pair for this purpose, then use the passphrase that you provide while generating the pair. For the detailed procedure on Implementing Key-based Authentication refer to Troubleshooting the Failure of the eG Remote Agent to Connect to or Report Measures for Linux Guests.

    • If the guests belong to different domains - In this case, you might want to provide multiple domain names. If this is done, then, to access the guests in every configured domain, the test should be configured with the required user privileges; this implies that along with multiple DOMAIN names, multiple ADMIN USER names and ADMIN PASSWORDs would also have to be provided. To help administrators provide these user details quickly and easily, the eG administrative interface embeds a special configuration page.

      To access this page, simply click on the Click here hyperlink that appears just above the parameters of this test in the test configuration page. To know how to use the special page, refer to Configuring Users for VM Monitoring.

    • If the INSIDE VIEW USING flag is set to ‘eG VM Agent (Windows)’ - In this case, the inside view can be obtained without domain administrator privileges. Therefore, set the domain, admin user, and admin password parameters to none.

  10. IGNORE VMS INSIDE VIEW - Administrators of some high security XenServer environments might not have permissions to internally monitor one/more VMs. The eG agent can be configured to not obtain the 'inside view' of such ‘inaccessible’ VMs using the IGNORE VMS INSIDE VIEW parameter. Against this parameter, you can provide a comma-separated list of VM names, or VM name patterns, for which the inside view need not be obtained. For instance, your IGNORE VMS INSIDE VIEW specification can be: *xp,*lin*,win*,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside view of all VMs on a XenServer host by default.

    Note:

    While performing VM discovery, the eG agent will not discover the operating system of the VMs configured in the IGNORE VMS INSIDE VIEW text box.

  11. EXCLUDE VMS - Administrators of some virtualized environments may not want to monitor some of their less-critical VMs - for instance, VM templates - both from 'outside' and from 'inside'. The eG agent in this case can be configured to completely exclude such VMs from its monitoring purview. To achieve this, provide a comma-separated list of VMs to be excluded from monitoring in the EXCLUDE VMS text box. Instead of VMs, VM name patterns can also be provided here in a comma-separated list. For example, your EXCLUDE VMS specification can be: *xp,*lin*,win*,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside and outside views of all VMs on a virtual host by default. By providing a comma-separated list of VMs/VM name patterns in the EXCLUDE VMS text box, you can make sure the eG agent stops collecting 'inside' and 'outside' view metrics for a configured set of VMs.
  12. IGNORE WINNT - By default, the eG agent does not support the inside view for VMs executing on Windows NT operating systems. Accordingly, the IGNORE WINNT flag is set to Yes by default.
  13. REPORT BY USER - While monitoring a Citrix XenServer, the REPORT BY USER flag is set to No by default, indicating that by default, the guest operating systems on the XenServer are identified using the hostname specified in the operating system. On the other hand, while monitoring a Citrix XenServer - VDI, this flag is set to Yes by default; this implies that in case of the XenServer VDI model, by default, the desktops will be identified using the login of the user who is accessing them. In other words, in VDI environments, this test will, by default, report measures for every username_on_virtualmachinename.

  14. REPORT POWERED OS - This flag becomes relevant only if the report by user flag is set to ‘Yes’.

    If the report powered os flag is set to Yes (which is the default setting), then this test will report measures for even those VMs that do not have any users logged in currently. Such guests will be identified by their virtualmachine name and not by the username_on_virtualmachinename. On the other hand, if the report powered os flag is set to No, then this test will not report measures for those VMs to which no users are logged in currently.  

  15. webport - By default, in most virtualized environments, the XenServer listens on port 80 (if not SSL-enabled) or on port 443 (if SSL-enabled). This implies that while monitoring an SSL-enabled XenServer, the eG agent, by default, connects to port 443 of the server to pull out metrics, and while monitoring a non-SSL-enabled XenServer, the eG agent connects to port 80. Accordingly, the webport parameter is set to 80 or 443 depending upon the status of the ssl flag.  In some environments however, the default ports 80 or 443 might not apply. In such a case, against the webport parameter, you can specify the exact port at which the XenServer in your environment listens so that the eG agent communicates with that port.
  16. USE TOP FOR DD - This parameter is applicable only to Linux VMs. By default, this parameter is set to No. This indicates that, by default, this test will report the detailed diagnosis of the Virtual CPU utilization measure for each processor on a Linux VM by executing the usr/bin/ps command. On some Linux flavors however, this command may not function properly. In such cases, set the USE TOP FOR DD parameter to Yes. This will enable the eG agent to extract the detailed diagnosis of the Virtual CPU utilization measure by executing the /usr/bin/top command instead.
  17. DETAILED DIAGNOSIS - To make diagnosis more efficient and accurate, the eG suite embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option.

    The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:

    • The eG manager license should allow the detailed diagnosis capability
    • Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.

 

Measurements made by the test

Measurement Description Measurement Unit Interpretation

Virtual CPU utilization:

This measurement indicates the percentage of CPU utilized by the processor.

Percent

A high value could signify a CPU bottleneck. The CPU utilization may be high because a few processes are consuming a lot of CPU, or because there are too many processes contending for a limited resource. The detailed diagnosis of this test reveals the top-10 CPU-intensive processes on the guest.

System usage of virtual CPU:

Indicates the percentage of CPU time spent for system-level processing.

Percent

An unusually high value indicates a problem and may be due to too many system-level tasks executing simultaneously.

Run queue in VM:

Indicates the instantaneous length of the queue in which threads are waiting for the processor cycle. This length does not include the threads that are currently being executed.

Number

A value consistently greater than 2 indicates that many processes could be simultaneously contending for the processor.

Blocked processes in VM:

Indicates the number of processes blocked for I/O, paging, etc.

Number

A high value could indicate an I/O problem on the guest (e.g., a slow disk).

Swap memory in VM:

Denotes the committed amount of virtual memory. This corresponds to the space reserved for virtual memory on disk paging file(s).

MB

An unusually high value for the swap usage can indicate a memory bottleneck. Check the memory utilization of individual processes to figure out the process(es) that has (have) maximum memory consumption and look to tune their memory usages and allocations accordingly.

Free memory in VM:

Indicates the free memory available.

MB

This measure typically indicates the amount of memory available for use by applications running on the target VM.

On Unix operating systems (AIX and Linux), the operating system tends to use parts of the available memory for caching files, objects, etc. When applications require additional memory, this is released from the operating system cache. Hence, to understand the true free memory that is available to applications, the eG agent reports the sum of the free physical memory and the operating system cache memory size as the value of the Free memory in VM measure while monitoring AIX and Linux guest operating systems.   

Scan rate in VM:

Indicates the memory scan rate.

Pages/Sec

A high value is indicative of memory thrashing. Excessive thrashing can be detrimental to guest performance.

Note:

For multi-processor systems, where the CPU statistics are reported for each processor on the system, the statistics that are system-specific (e.g., run queue length, free memory, etc.) are only reported for the "Summary" descriptor of this test.

The detailed diagnosis capability of the Virtual CPU utilization measure, if enabled, provides a listing of the top 10 CPU-consuming processes (see Figure 1). In the event of a CPU bottleneck, this information will enable users to identify the processes consuming a high percentage of CPU time. The users may then decide to stop such processes, so as to release the CPU resource for more important processing purposes.

Figure 1 : The top 10 CPU consuming processes

Note:

While instantaneous spikes in CPU utilization are captured by the eG agents and displayed in the Measures page, the detailed diagnosis will not capture/display such instantaneous spikes. Instead, detailed diagnosis will display only a consistent increase in CPU utilization observed over a period of time.