EMC ECS Audit Log Test

The test monitors EMC ECS Storage system Audit logs for any events.

Target of the test : A Dell EMC Elastic Cloud Storage System

Agent deploying the test : A remote agent

Outputs of the test : One set of results for EMC ECS storage system being monitored

Configurable parameters for the test
Parameter	Description
Test period	How often should the test be executed .
Host	The host for which the test is to be configured. Since the storage device is managed using the IP address of its storage controller, the same will be displayed as host.
Port	The port number at which the specified host listens. By default, this is NULL.
ECS REST API Port	This is the port at which REST API connectivity is provided. By default, port 4443 is used.
Username and Password	To collect performance metrics from the target storage device, the eG agent should be configured with the credentials of a user who is vested with "read-only" privileges to access REST API of the target storage device. Specify the credentials of such a user in the Username and Password text boxes.
Confirm Password	Confirm the password by retyping it here.
Timeout Seconds	Specify the time duration for which this test should wait for a response from the storage system in the Timeout text box. By default, this is 60 seconds.
DD Frequency	Refers to the frequency with which detailed diagnosis measures are to be generated for this test. The default is 1:1. This indicates that, by default, detailed measures will be generated every time this test runs, and also every time the test detects a problem. You can modify this frequency, if you so desire. Also, if you intend to disable the detailed diagnosis capability for this test, you can do so by specifying none against DD frequency.
Detailed Diagnosis	To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option. The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled: The eG manager license should allow the detailed diagnosis capability Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.

Measurements made by the test
Measurement	Description	Measurement Unit	Interpretation
Number of Events	Indicates the number of events occurred in the target storage system.	Number	Events are crucial to problem solving and can provide vital information about the system and could allow you to investigate issues. Large number of events in the system may indicate a already existing or potential problem. If the number of events is large, you must check the audit log.