Horizon UAG Connectivity Test

This test measures the availability and responsiveness of the target gateway appliance.

Target of the test : A Horizon Unified Access Gateway

Agent deploying the test: A remote agent

Outputs of the test : One set of results for the target Horizon Unified Access Gateway being monitored.

Configurable parameters for the test
Parameters	Description
Test Period	This indicates how often should the test be executed.
Host	The host for which the test is to be configured.
Port	Refers to the port used by the Horizon Unified Access Gateway appliance. By default, this is 9443.
Username, Password, Confirm Password	This test emulates a user accessing the HTTP/S URL of a connection server, and in the process, reports the availability and responsiveness of that server. To establish this connection and report metrics, the test requires read-only permissions. Therefore, configure the credentials of a read-only user in the Username and Password parameters. Confirm the Password by retyping it in the Confirm Password text box.
SSL	By default, the appliance is SSL-enabled. This is why, the SSL flag is set to Yes by default. In case the appliance is not SSL-enabled, then set this flag to No.

Measurements made by the test
Measurement	Description	Measurement Unit	Interpretation
Availability	Indicates the availability of the monitored gateway appliance.	Percent	The availability is 100% when the gateway appliance is responding to a request and 0% when it is not. Availability problems may be caused by a misconfiguration/malfunctioning of the gateway appliance, or if the gateway appliance has not been started.
Response time	Indicates the time taken by the gateway appliance to respond to a request.	Seconds	A sudden increase in response time is indicative of bottleneck at the monitored gateway appliance.