Exchange Epoxy Test

This test reports statistics pertaining to the Epoxy on an Exchange 2000/2003.

Target of the test : An Exchange server 2000/2003

Agent deploying the test : An internal agent

Outputs of the test : One set of results for every Epoxy being monitored.

Configurable parameters for the test
Parameters Description

Test Period

How often should the test be executed.

Host

The IP address of the machine where the Exchange Server is installed.

Port

The port number through which the Exchange server communicates. The default is 691.

IsPassive

If the value chosen is Yes, then the Exchange server under consideration is a passive server in an Exchange cluster. No alerts will be generated if the server is not running. Measures will be reported as “Not applicable’ by the agent if the server is not up.

Measurements made by the test
Measurement Description Measurement Unit Interpretation

Client out queue length

The number of messages sent by the Inetinfo.exe process that are in the queue.

Number

This queue size should be below 10 at all times. If the queue size exceeds 10, it is indicative of a bottleneck in the Inetinfo.exe process.

Exchange store out queue length

The number of messages sent by the Store.exe process that are in the queue.

Number

This queue size should be below 10 at all times. If the queue size exceeds 10, it is indicative of a bottleneck in the Store.exe process.

Disk performance issues on the Exchange store may prevent the Store.exe process from effectively handling incoming requests.