Hyper-V Switch Ports Test
This test reports the network traffic flowing into and out of every virtual switch port (i.e., virtual NIC) on the Hyper-V host. This test is disabled by default. To enable the test, go to the enable / disable tests page using the menu sequence : Agents -> Tests -> Enable/Disable, pick Hyper-V as the Component type, Performance as the Test type, choose the test from the disabled tests list, and click on the >> button to move the test to the ENABLED TESTS list. Finally, click the Update button.
Target of the test : A Hyper-V / Hyper-V VDI server
Agent executing the test : An internal agent
Output of the test : One set of results for each virtual switch port available to the Hyper-V host monitored
| Parameter | Description |
|---|---|
|
Test period |
This indicates how often should the test be executed. |
|
Host |
Specify the HOST for which this test is to be configured. |
| Measurement | Description | Measurement Unit | Interpretation |
|---|---|---|---|
|
Broadcast packets received |
Indicates the total number of packets received per second by this port. |
Packets/Sec |
|
|
Broadcast packets sent |
Indicates the total number of packets sent per second by the switch. |
Packets/Sec |
|
|
Data received |
Indicates the rate at which bytes were received by the port. |
Mbps |
|
|
Data transmitted |
Indicates the rate at which bytes of data were sent by the port. |
Mbps |
|
|
Packets received |
Indicates the total number of packets received by the port per second. |
Packets/Sec |
|
|
Packets sent |
Indicates the total number of packets sent by the port per second. |
Packets/Sec |
|
