OS Details - OpenStack Test
This test collects various metrics pertaining to the CPU, disk, and memory usage of every OpenStack hypervisor supported by the target OpenStack Controller. Using the metrics reported by this test, administrators can optimize the resource utilization of the hypervisors so as to ensure seamless operations on the hypervisors.
Target of the test : An OpenStack Controller
Agent deploying the test : A remote agent
Outputs of the test : One set of results for each OpenStack hypervisor connected to the target OpenStack Controller.
Parameter | Description |
---|---|
Test period |
How often should the test be executed. |
Host |
The host for which the test is to be configured. |
Port |
The port number at which the specified Host listens to. |
Project Name |
To enable this test to access the target hypervisor and pull out the performance metrics, you should specify the name of the project that is mapped to the target hypervisor in this text box. To know how to find out the project name from the OpenStack console, refer to Obtaining Project Name and Domain Details from OpenStack Console. |
Domain Name and Domain ID |
Specify the name and ID of the domain to which the specified project belongs to against the Domain Name and Domain ID parameters. To know how to find out the domain name and domain ID from the OpenStack console, refer to Obtaining Project Name and Domain Details from OpenStack Console. |
User Name, Password and Confirm Password |
To enable this test to pull out the performance metrics, you should configure the test with credentials of a user who is assigned with 'reader' role to access the above-mentioned project. Specify the credentials of such a user in the User Name and Password text boxes. Then, confirm the password by retyping it in the Confirm Password text box. |
Identity Version |
Specify the version of the Identity service API that is being used in the OpenStack environment. By default, this parameter is configured with the latest version of the API i.e. v3. |
SSL |
By default, the target controller is not SSL-enabled. This indicates that by default, the eG agent communicates with the target controller using HTTP. Accordingly, the SSL flag is set to No by default. If you configure the target controller to use SSL, then make sure that the SSL flag is set to Yes, so that the eG agent communicates with the target controller using HTTPS. |
Detailed Diagnosis |
To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option. The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:
|
Measurement | Description | Measurement Unit | Interpretation |
---|---|---|---|
Services |
Indicates the number of services running on this hypervisor that is connected with the target controller. |
Number |
Use the detailed diagnosis of this measure to know the details of zones to which the services are belonging to. |
Total CPUs |
Indicates the total number of CPUs allocated for running the services on this hypervisor. |
Number |
|
Used CPUs |
Indicates the number of CPUs that are currently in use. |
Number |
|
Free CPUs |
Indicates the number of CPUs that are available for use. |
Number |
A high value is preferred for this measure. |
CPU usage |
Indicates the percentage of the CPU used for running services on this hypervisor. |
Percent |
|
Total memory |
Indicates the total amount of memory allocated for this hypervisor. |
GB |
|
Used memory |
Indicates the amount of memory used by this hypervisor. |
GB |
|
Free memory |
Indicates the total amount of memory available for use by this hypervisor. |
GB |
A high value is preferred for this measure. |
Memory usage |
Indicates the percentage of memory used by this hypervisor. |
Percent |
|
Total disk |
Indicates the total amount of disk space allocated for this hypervisor. |
GB |
|
Used disk |
Indicates the amount of disk space used by this hypervisor. |
GB |
|
Free disk |
Indicates the amount of disk space available for use by this hypervisor. |
GB |
A high value is preferred for this measure. |
Disk usage |
Indicates the percentage of disk space used by this hypervisor. |
Percent |
|