Windows Security Center Status - OS Test

Windows Security Center (WSC) is a comprehensive reporting tool that helps administrators establish and maintain a protective security layer around Windows VMs to monitor the VM's health state. The Windows Security Center also monitors third party security products such as firewall, antivirus, antimalware and antispyware, installed on the VM. In order for the security products to be compliant with Windows and successfully report status to Action Center, these products should be registered with the security center. The security products communicate any subsequent status changes to the security center using private APIs. The security center, in turn, communicates these updates to Action Center, where they are finally displayed to the end user. With Windows Security Center, administrators can check whether any security product is installed and turned on, and if the definitions of the products are up to date and real-time protection is enabled. By continuously monitoring the Windows Security Center, administrators can instantly find out whether the security products are up-to-date or out dated, and the status of security products in real-time. This is what exactly the Windows Security Center Status - OS test does!

This test auto-discovers the security products installed on the Windsows VMs on the target host, and for each security product, reports the current definition status and the current protection status. Using these details, administrators are alerted to the systems on which the automatic updates are outdated and virus protection turned off. By closely monitoring the status, administrators can take necessary actions before the end users become vulnerable to virus threats or malicious attacks.

Target of the test : A Proxmox Hypervisor

Agent deploying the test : An internal/remote agent

Outputs of the test : One set of results for every security product:provider combination on each Windows VMs on the target server.

Configurable parameters for the test
Parameter Description

Test period

How often should the test be executed.

Host

The IP address of the host for which this test is to be configured.

Port

The port at which the specified host listens. By default, this will be NULL.

Proxmox Node Name

Specify the name of the Proxmox node that you wish to monitor in this text box. By default, this parameter is set to none indicating that the test monitor all the nodes in the target hypervisor.

Ignore VMs Inside View

Administrators of some high security Proxmox environments might not have permissions to internally monitor one/more VMs. The eG agent can be configured to not obtain the 'inside view' of such ‘inaccessible’ VMs using the Ignore VMs Inside View parameter. Against this parameter, you can provide a comma-separated list of VM names, or VM name patterns, for which the inside view need not be obtained. For instance, yourIgnore VMs Inside View specification can be: *xp,*lin*,win*,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside view of all VMs on a Proxmox Hypervisor by default.

Note:

While performing VM discovery, the eG agent will not discover the operating system of the VMs configured in the Ignore VMs Inside View text box.

Ignore WINNT

By default, the eG agent does not support the inside view for VMs executing on Windows NT operating systems. Accordingly, the Ignore WINNT flag is set to Yes by default.

Exclude VMs

Administrators of some virtualized environments may not want to monitor some of their less-critical VMs - for instance, VM templates - both from 'outside' and from 'inside'. The eG agent in this case can be configured to completely exclude such VMs from its monitoring purview. To achieve this, provide a comma-separated list of VMs to be excluded from monitoring in the Exclude VMs text box. Instead of VMs, VM name patterns can also be provided here in a comma-separated list. For example, your Exclude VMs specification can be: *xp,*lin*,win*,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside and outside views of all VMs on a virtual host by default. By providing a comma-separated list of VMs/VM name patterns in the Exclude VMs text box, you can make sure the eG agent stops collecting 'inside' and 'outside' view metrics for a configured set of VMs.

Domain, Admin User, Admin Password, and Confirm Password

By default, this test connects to each virtual VM remotely and attempts to collect “inside view” metrics. In order to obtain a remote connection, the test must be configured with user privileges that allow remote communication with the virtual VMs. The first step towards this is to specify the Domain within which the virtual VMs reside. The Admin User and Admin Password will change according to the Domain specification. Discussed below are the different values that the Domain parameter can take, and how they impact the Admin User and Admin Password specifications:

  • If the VMs belong to a single domain : If the VMs belong to a specific domain, then specify the name of that domain against the Domain parameter. In this case, any administrative user in that domain will have remote access to all the VMs. Therefore, an administrator account in the given domain can be provided in the Admin User field and the corresponding password in the Admin Password field. Confirm the password by retyping it in the Confirm Password text box.
  • If the VMs do not belong to any domain (as in the case of Linux VMs) : In this case, specify "none" in the Domain field, and specify a local administrator account name in the Admin User below.

    Prior to this, you need to ensure that the same local administrator account is available or is explicitly created on each of the virtual machines to be monitored. Then, proceed to provide the password of the Admin User against Admin Password, and confirm the password by retyping it in the Confirm Password text box.

    If key-based authentication is implemented between the eG agent and the SSH daemon of a Linux VM, then, in the Admin User text box, enter the name of the user whose <USER_HOME_DIR> (on that Linux VM) contains a .ssh directory with the public key file named authorized_keys. The Admin password in this case will be the passphrase of the public key; the default public key file that is bundled with the eG agent takes the password eginnovations. Specify this as the Admin Password if you are using the default private/public key pair that is bundled with the eG agent to implement key-based authentication. On the other hand, if you are generating a new public/private key pair for this purpose, then use the passphrase that you provide while generating the pair. For the detailed procedure on Implementing Key-based Authentication refer to Troubleshooting the Failure of the eG Remote Agent to Connect to or Report Measures for Linux Guests.

  • If the VMs belong to different domains - In this case, you might want to provide multiple domain names. If this is done, then, to access the VMs in every configured domain, the test should be configured with the required user privileges; this implies that along with multiple Domain names, multiple Admin User names and Admin Passwords would also have to be provided. To help administrators provide these user details quickly and easily, the eG administrative interface embeds a special configuration page.

    To access this page, simply click on the icon adjacent to the Admin User text box. To know how to use the special page, refer to Configuring Users for VM Monitoring.

  • If the Inside View Using flag is set to ‘eG VM Agent (Windows)’ - In this case, the inside view can be obtained without domain administrator privileges. Therefore, set the Domain, Admin User, and Admin Password parameters to none.

Report By User

While monitoring a Proxmox Hypervisor, the Report By User flag is set to No by default, indicating that by default, the VM operating systems on the target hypervisor are identified using the hostname specified in the operating system. On the other hand, if you want the desktops to be identified using the login of the user who is accessing them, set this flag to Yes. In other words, in VDI environments, this test will, by default, report measures for every username_on_virtualmachinename

Report Powered OS

This flag becomes relevant only if the Report By User flag is set to ‘Yes’.

If this flag is set to Yes (which is the default setting), then this test will report measures for even those VMs that do not have any users logged in currently. Such VMs will be identified by their virtualmachine name and not by the username_on_virtualmachinename. On the other hand, if the Report Powered OS flag is set to No, then this test will not report measures for those VMs to which no users are logged in currently. 

DD Frequency

Refers to the frequency with which detailed diagnosis measures are to be generated for this test. The default is 1:1. This indicates that, by default, detailed measures will be generated every time this test runs, and also every time the test detects a problem. You can modify this frequency, if you so desire. Also, if you intend to disable the detailed diagnosis capability for this test, you can do so by specifying none against DD frequency.

Detailed Diagnosis

To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option.

The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:

  • The eG manager license should allow the detailed diagnosis capability
  • Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.
Measurements made by the test
Measurement Description Measurement Unit Interpretation

Signature status

Indicates the current status of this security product.

 

The values reported by this measure and its numeric equivalents are mentioned in the table below:

Measure Value

Numeric Value
Unknown 25
Up to date 15
Out of date 10

Note:

By default, this measure reports the Measure Values listed in the table above to indicate the current state of this security product. The graph of this measure however, represents the status of a server using the numeric equivalents only.

Use the detailed diagnosis of this measure, to know about the name of Windows system on which the product is running, the file paths of product executables and the current status of the product.

Real-time protection status

Indicates the real-time protection status of this security product.

 

The values reported by this measure and its numeric equivalents are mentioned in the table below:

Measure Value

Numeric Value
Unknown 25
Snoozed 20
On 15
Expired 10
Off 0

Note:

By default, this measure reports the Measure Values listed in the table above to indicate the current protection status of this security product. The graph of this measure however, represents the status of a server using the numeric equivalents only.