RHEV Virtual Network Traffic Test
Red Hat Enterprise Virtualization Manager supports multiple virtual networks and VLANs, allowing an administrator to centrally manage and configure the virtual network. Virtual networks emulate network connectivity within the RHEV server and allow VMs hosted on that server to exchange data. Continuous monitoring of these virtual networks will enable administrators to isolate which virtual networks are healthy and are too busy trafficking data to and from VMs, and which virtual networks are experiencing error conditions. The RHEV Virtual Network Traffic test does just that.
Target of the Test: A RHEV Hypervisor
Agent running the test: A remote agent
Output of the test: One set of results for every virtual network on the RHEV hypervisor being monitored.
Parameter | Description |
---|---|
Test period |
How often should the test be executed. |
Host |
The host for which the test is to be configured. |
RHEL MGR Host, |
To auto-discover the VMs on a target RHEV hypervisor and obtain the outside view of the performance of each VM, the eG agent needs to connect to the RHEV Manager that manages the target RHEV hypervisor. To enable the eG agent to obtain the outside view, you need to configure the test with the following:
If the RHEV hypervisor being monitored was discovered via an RHEV manager, then the IP address, port number, domain name, and user credentials of the RHEV manager used for discovery will be automatically displayed against the respective parameters. If the RHEV hypervisor being monitored was not discovered via an RHEV manager, but you still want to use an RHEV manager for obtaining the outside view, then, you can select any IP address of your choice from the RHEL MGR host list. By default, this list will be populated with the IP addresses/host names of all the RHEV managers that were configured for the purpose of discovering the RHEV hypervisors. If you select an RHEL MGR host from this list, then the corresponding port number, domain name, and user credentials will be automatically displayed against the respective parameters. On the other hand, if the RHEV manager that you want to use for metrics collection is not available in the RHEL MGR Host list, then, you can configure an RHEV manager on-the-fly by picking the Other option from the RHEL MGR Host list. An ADD THE RHEV MANAGER DETAILS window will then pop up. Refer to Configuring an RHEV Manager to Use for Monitoring the RHEV Hypervisor to know how to add an RHEV manager using this window. Once the RHEV manager is added, its IP address, port number, domain name and user credentials will be displayed against the corresponding parameters. |
Confirm Password |
Confirm the RHEL MGR Password by retyping it here. |
SSL |
If the RHEV manager to which the eG agent should connect is SSL-enabled, then set this flag to Yes. If not, set it to No. |
Measurement | Description | Measurement Unit | Interpretation |
---|---|---|---|
Network data transmitted |
Indicates the rate at which data is transmitted over this virtual network. |
Mbps |
A high rate of incoming and outgoing data could indicate that the virtual network is very busy or is been overloaded with traffic. |
Network data received |
Indicates the rate at which data is received over this virtual network. |
Mbps |
|
Errors during transmission |
Indicates the number of errors that occurred when data was transmitted over this virtual network. |
Number |
Ideally, the value of both these measures should be 0. Comparing the value of each of these measures across virtual networks will introduce you to the error-prone networks. |
Errors during reception |
Indicates the number of errors that occurred when data was received over this virtual network. |
Number |