Endpoint Status Test

This test helps the administrators to ensure that Dell Wyse thin client is powered on, check if the Dell Wyse thin client is configured to connect to a virtual desktop infrastructure (VDI) and verify its ability to establish remote desktop sessions.

Target of the test : Dell Wyse Client Group

Agent deploying the test : A remote agent

Outputs of the test : One set of results for each Dell Wyse thin client

Configurable parameters for the test
Parameter	Description
Test Period	How often should the test be executed.
Host	The nick name of the Dell Wyse Client Group component for which this test is to be configured.
Port	Refers to the port at which the specified host listens to. By default, this is NULL.
Inside View Using	To obtain the 'inside view' of performance of the Dell Wyse thin clients - i.e., to measure the internal performance of the Dell Wyse thin clients - this test uses a light-weight VM Agent software deployed on each of the Dell Wyse thin clients. The VM Agents collect performance metrics from the Dell Wyse thin clients and communicate the metrics to the eG remote agent using TCP protocol. Accordingly, by default, this parameter is set to eG VM Agent.
Report By User	Since this test runs for an 'Dell Wyse Client Group' component, this flag is set to No by default.
Report Powered OS	Since this test runs for an 'Dell Wyse Client Group' component, this flag is set to Yes by default.
Is Cloud VMs	Since this test runs for an 'Dell Wyse Client Group' component, this flag is set to Yes by default.
DD Frequency	Refers to the frequency with which detailed diagnosis measures are to be generated for this test. For instance, if you set to 1:1, it means that detailed measures will be generated every time this test runs, and also every time the test detects a problem.
Detailed Diagnosis	To make diagnosis more efficient and accurate, the eG suite embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option. The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled: The eG manager license should allow the detailed diagnosis capability Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.

Measurements made by the test
Measurement	Description	Measurement Unit	Interpretation
Endpoints reported in the last hour	Indicates the number of Dell Wyse Thin Clients that were reported active during the last 1 hour.	Number
Endpoints reporting currently	Indicates the number of Dell Wyse Thin Clients that were currently reported active.	Number
Endpoints with users	Indicates the number of Dell Wyse Thin Clients that were connected with users.	Number
Endpoints without users	Indicates the number of Dell Wyse Thin Clients that were connected without users.	Number	Potential overload on the network infrastructure is possible that may affect network performance for other active users or thin clients.