VNXe NFS Test

By continuously monitoring the NFS operations on every storage processor, you can easily identify that storage processor on which NFS is most ineffective/problematic. This is where, the VNXe NFS test helps. This test monitors the NFS reads and writes performed on each storage processor in the target storage system and reports the following:

How well the I/O operations were performed using the NFS protocol, and whether any delays were noticed;
The total amount of data transacted when performing NFS reads and writes

These statistics will not only enable administrators to promptly detect current or probable latencies in I/O operations when using NFS, but will also help them figure out which I/O activity was most latent – i.e., whether reading or writing – and on which storage processor.

Target of the test : An EMC VNXe Storage system

Agent deploying the test : A remote agent

Outputs of the test : One set of results for each Storage Processor of the target storage system being monitored

Configurable parameters for the test
Parameters	Description
Test Period	How often should the test be executed.
Host	The host for which the test is to be configured.
Unisphere CLI Path	The eG agent uses the command-line utility, UEMCli.exe, which is part of the UniSphere Management Suite, to communicate with and monitor the storage device. To enable the eG agent to invoke the CLI, configure the full path to the CLI in the UniSphere CLI Path text box.
Username and Password	Provide the credentials of a user possessing monitor role to access the storage device in the Username and Password text boxes.
Confirm Password	Confirm the password by retyping it here.
VNXe Version	Select the version of the target EMC VNXe storage system that is to be monitored from this list. By default, 1600 will be chosen from this list.
Detailed Diagnosis	To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option. The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled: The eG manager license should allow the detailed diagnosis capability Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.

Measurements made by the test
Measurement	Description	Measurement Unit	Interpretation
Peak read bandwidth	Indicates the maximum amount of data read through NFS protocol from this storage processor per second.	MB/sec	The detailed diagnosis of this measure lists the VNX time, name of the storage processor and read bandwidth of the storage processor.
Average read bandwidth	Indicates the average amount of data read through NFS protocol from this storage processor per second.	MB/sec
Peak write bandwidth	Indicates the maximum amount of data written using NFS protocol to this storage processor per second.	MB/sec	The detailed diagnosis of this measure lists the VNX time, name of the storage processor and write bandwidth of the storage processor.
Average write bandwidth	Indicates the average amount of data written using NFS protocol to this storage processor per second.	MB/sec
Peak read IOPS	Indicates the maximum number of read operations performed using NFS protocol on this storage processor per second.	IOPS	The detailed diagnosis of this measure lists the VNX time, name of the storage processor and read IOPS of the storage processor.
Average read IOPS	Indicates the average number of read operations performed using NFS protocol on this storage processor per second.	IOPS
Peak write IOPS	Indicates the maximum number of write operations performed using NFS protocol on this storage processor per second.	IOPS	The detailed diagnosis of this measure lists the VNX time, name of the storage processor and write IOPS of the storage processor.
Average write IOPS	Indicates the average number of write operations performed using NFS protocol on this storage processor per second.	IOPS
Peak total IOPS	Indicates the total number of I/O operations performed using NFS protocol on this storage processor per second.	IOPS	The detailed diagnosis of this measure lists the VNX time, name of the storage processor and total IOPS of the storage processor.
Average total IOPS	Indicates the average number of I/O operations performed using NFS protocol on this storage processor per second.	IOPS