HCP Migration Test

The HCP Migration service migrates objects (text/ image files) from one node to another node or even to another replication server. During migration, de-duplication process occurs and the space occupied by the duplicated data in the source node will be made free in the destination node/replication server. This test monitors the size/number of objects that have completed migration and those that are yet to be migrated.

Target of the test : Hitachi Content Platform

Agent deploying the test : A remote agent

Outputs of the test : One set of results for the target Hitachi Content Platform.

Configurable parameters for the test
Parameter Description

Test period

How often should the test be executed.

Host

The IP address of the target switch that is being monitored.

SNMPPort

The port at which the monitored target exposes its SNMP MIB; the default is 161.

SNMPVersion

By default, the eG agent supports SNMP version 1. Accordingly, the default selection in the SNMPversion list is v1. However, if a different SNMP framework is in use in your environment, say SNMP v2 or v3, then select the corresponding option from this list.

SNMPCommunity

The SNMP community name that the test uses to communicate with the switch. This parameter is specific to SNMP v1 and v2 only. Therefore, if the SNMPVersion chosen is v3, then this parameter will not appear.

Username

This parameter appears only when v3 is selected as the SNMPVersion. SNMP version 3 (SNMPv3) is an extensible SNMP Framework which supplements the SNMPv2 Framework, by additionally supporting message security, access control, and remote SNMP configuration capabilities. To extract performance statistics from the MIB using the highly secure SNMP v3 protocol, the eG agent has to be configured with the required access privileges – in other words, the eG agent should connect to the MIB using the credentials of a user with access permissions to be MIB. Therefore, specify the name of such a user against this parameter.

AuthPass

Specify the password that corresponds to the above-mentioned Username. This parameter once again appears only if the SNMPversion selected is v3.

Confirm Password

Confirm the AuthPass by retyping it here.

AuthType

This parameter too appears only if v3 is selected as the SNMPVersion. From the AuthType list box, choose the authentication algorithm using which SNMP v3 converts the specified Username and password into a 32-bit format to ensure security of SNMP transactions. You can choose between the following options:

  • MD5 – Message Digest Algorithm
  • SHA – Secure Hash Algorithm

EncryptFlag

This flag appears only when v3 is selected as the SNMPVersion. By default, the eG agent does not encrypt SNMP requests. Accordingly, the this flag is set to No by default. To ensure that SNMP requests sent by the eG agent are encrypted, select the Yes option.

EncryptType

If this EncryptFlag is set to Yes, then you will have to mention the encryption type by selecting an option from the EncryptType list. SNMP v3 supports the following encryption types:

  • DES – Data Encryption Standard
  • AES – Advanced Encryption Standard

EncryptPassword

Specify the encryption password here.

Confirm Password

Confirm the encryption password by retyping it here.

Timeout

Specify the duration (in seconds) within which the SNMP query executed by this test should time out in this text box. The default is 10 seconds.

Data Over TCP

By default, in an IT environment, all data transmission occurs over UDP. Some environments however, may be specifically configured to offload a fraction of the data traffic – for instance, certain types of data traffic or traffic pertaining to specific components – to other protocols like TCP, so as to prevent UDP overloads. In such environments, you can instruct the eG agent to conduct the SNMP data traffic related to the monitored target over TCP (and not UDP). For this, set this flag to Yes. By default, this flag is set to No.

EngineID

This parameter appears only when v3 is selected as the SNMPVersion. Sometimes, the test may not report metrics when AES192 or AES256 is chosen as the Encryption type. To ensure that the test report metrics consistently, administrators need to set this flag to Yes. By default, this parameter is set to No.

Measurements made by the test
Measurement Description Measurement Unit Interpretation

Migration state

Indicates whether the Hitachi Content Platform is currently migrating or not.

 

The values reported by this measure and its numeric equivalents are mentioned in the table below:

Measure Value

Numeric Value
Not Migrating 0
Migrating 1

Note:

By default, this measure reports the Measure Values listed in the table above to indicate whether/not migration is in progress.

Total size to be migrate

Indicates the total size of the objects to be migrated.

MB

 

Total objects to be migrate

Indicates the number of objects to be migrated.

Number

 

Completed size

Indicates the size of the objects that were migrated.

MB

A low value is desired for this measure.

Completed objects

Indicates the number of objects that were migrated.

Number

 

Remaining size

Indicates the size of the objects that are yet to be migrated.

MB

A low value is desired for this measure.

Remaining objects

Indicates the number of objects pending migration.

Number

 

Size remaining

Indicates what percentage of the total space available for migration is occupied by the objects yet to be migrated.

Percent

A low value is desired for these measures.

 

Remaining objects

Indicates what percentage of objects is still to be migrated.

Percent