VSP Gx00 Controller Usage Test

This test monitors the usage of each controller available in the Hitachi VSP storage device, and reveals over-utilized controllers (if any).

Target of the test : A Hitachi VSP Gx00 Series storage device

Agent deploying the test : A remote agent

Outputs of the test : One set of results for every controller on the Hitachi VSP Gx00 Series device monitored

Configurable parameters for the test
  1. TEST PERIOD - How often should the test be executed
  2. HOST - The host for which the test is to be configured.
  3. PORT - The port at which the device listens. By default, this is set to NULL.
  4. DKC SERIAL NUMBER - Specify the serial number of the target Hitachi VSP Gx00 Series storage device that is to be monitored.
  5. USERID and PASSWORD – To extract metrics from the target storage device, the eG agent should be configured with the credentials of a special user account, which is specifically created for use with the Java export utility. This user account should fulfill the following conditions:

    • Should not possess the ‘write’ permission;
    • Can be of any user type; however, to ensure that the eG agent collects statistics pertaining to all storage partitions, it is recommended that this user is of type storage administrator;

    Specify the credentials of such a user in the USERID and PASSWORD text boxes.

  6. CONFIRM PASSWORD - Confirm the password by retyping it here.
  7. TIMEOUT - Specify the duration (in seconds) beyond which this test should time out in the TIMEOUT text box. The default is 3 seconds.
Measures made by the test:
Measurement Description Measurement Unit Interpretation

Usage:

Indicates the percentage of time for which this controller was in use.

Percent

A high value or a value close to 100% is indicative of excessive usage of the controllers. By comparing the value of this measure across controllers, you can accurately detect imbalances in load distribution, and rapidly identify the affected controllers.