Java Classes Test
This test reports the number of classes loaded/unloaded from the memory.
Target of the test : An IBM WebSphere Liberty server
Agent deploying the test : An internal agent
Outputs of the test : One set of results for the Java application being monitored.
Parameter | Description |
Test period |
How often should the test be executed. |
Host |
The host for which the test is to be configured. |
Port |
The port number at which the specified host listens to |
Mode |
This test can extract metrics from the Java application using either of the following mechanisms:
To configure the test to use SNMP, select the SNMP option. On the other hand, choose the JMX option to configure the test to use JMX instead. By default, the JMX option is chosen here. |
Service URL Path |
For the eG agent to collect metrics from the target IBM WebSphere Liberty server, the local connector should be enabled on the target server. Once the connector is enabled, a com.ibm.ws.jmx.local.address file will be created in the ${server.output.dir}/logs/state folder. The eG agent uses this file to connect to the target server and collect the required metrics from it. Therefore, specify the exact path to this file in the Service URL text box. For example, in case of Windows environments, the Service URL Path can be C:\wlp\usr\servers\server1\logs\state and in case of Linux environments, the Service URL Path can be /opt/wlp/ur/servers/server1/logs/state. |
Timeout |
Specify the duration (in seconds) for which this test should wait for a response from the target Java application. If there is no response from the target beyond the configured duration, the test will timeout. By default, this is set to 240 seconds. |
SNMPPort |
This parameter appears only if the Mode is set to SNMP. Here specify the port number through which the server exposes its SNMP MIB. Ensure that you specify the same port you configured in the management.properties file in the <JAVA_HOME>\jre\lib\management folder used by the target application. For more details, |
SNMP Version |
This parameter appears only if the Mode is set to SNMP. The default selection in the SNMP version list is v1. However, for this test to work, you have to select SNMP v2 or v3 from this list, depending upon which version of SNMP is in use in the target environment. |
SNMP Community |
This parameter appears only if the Mode is set to SNMP. Here, specify the SNMP community name that the test uses to communicate with the mail server. The default is public. This parameter is specific to SNMP v1 and v2 only. Therefore, if the SNMP version chosen is v3, then this parameter will not appear. |
User name |
This parameter appears only when v3 is selected as the SNMP version. SNMP version 3 (SNMPv3) is an extensible SNMP Framework which supplements the SNMPv2 Framework, by additionally supporting message security, access control, and remote SNMP configuration capabilities. To extract performance statistics from the MIB using the highly secure SNMP v3 protocol, the eG agent has to be configured with the required access privileges – in other words, the eG agent should connect to the MIB using the credentials of a user with access permissions to be MIB. Therefore, specify the name of such a user against this parameter. |
Context |
This parameter appears only when v3 is selected as the SNMPVERSION. An SNMP context is a collection of management information accessible by an SNMP entity. An item of management information may exist in more than one context and an SNMP entity potentially has access to many contexts. A context is identified by the SNMPEngineID value of the entity hosting the management information (also called a contextEngineID) and a context name that identifies the specific context (also called a contextName). If the USERNAME provided is associated with a context name, then the eG agent will be able to poll the MIB and collect metrics only if it is configured with the context name as well. In such cases therefore, specify the context name of the username in the context text box. By default, this parameter is set to none. |
Authpass |
Specify the password that corresponds to the above-mentioned user name. This parameter once again appears only if the snmpversion selected is v3. |
Confirm password |
Confirm the Authpass by retyping it here |
Authtype |
This parameter too appears only if v3 is selected as the SNMPversion. From the AuthType list box, choose the authentication algorithm using which SNMP v3 converts the specified username and password into a 32-bit format to ensure security of SNMP transactions. You can choose between the following options:
|
Encryptflag |
This flag appears only when v3 is selected as the SNMPVersion. By default, the eG agent does not encrypt SNMP requests. Accordingly, the flag is set to No by default. To ensure that SNMP requests sent by the eG agent are encrypted, select the Yes option. |
Encrypttype |
If the EncryptFlag is set to Yes, then you will have to mention the encryption type by selecting an option from the EncryptType list. SNMP v3 supports the following encryption types:DES - Data Encryption Standard3DES - Triple Data Encryption StandardAES - Advanced Encryption StandardAES128 - Advanced Encryption Standard 128 bitAES192 - Advanced Encryption Standard 192 bitAES256 - Advanced Encryption Standard 256 bit |
Encryptpassword |
Specify the encryption password here. |
Confirm password |
Confirm the encryption password by retyping it here. |
Data over TCP |
This parameter is applicable only if mode is set to SNMP. By default, in an IT environment, all data transmission occurs over UDP. Some environments however, may be specifically configured to offload a fraction of the data traffic – for instance, certain types of data traffic or traffic pertaining to specific components – to other protocols like TCP, so as to prevent UDP overloads. In such environments, you can instruct the eG agent to conduct the SNMP data traffic related to the monitored target over TCP (and not UDP). For this, set this flag to Yes. By default, this flag is set to No. |
EngineID |
This parameter appears only when v3 is selected as the SNMPVersion. Sometimes, the test may not report metrics when AES192 or AES256 is chosen as the Encryption type. To ensure that the test report metrics consistently, administrators need to set this flag to Yes. By default, this parameter is set to No. |
Measurement | Description | Measurement Unit | Interpretation |
---|---|---|---|
Classes loaded |
Indicates the number of classes currently loaded into memory. |
Number |
Classes are fundamental to the design of Java programming language. Typically, Java applications install a variety of class loaders (that is, classes that implement java.lang.ClassLoader) to allow different portions of the container, and the applications running on the container, to have access to different repositories of available classes and resources. A consistent decrease in the number of classes loaded and unloaded could indicate a road-block in the loading/unloading of classes by the class loader. If left unchecked, critical resources/classes could be rendered inaccessible to the application, thereby severely affecting its performance. |
Classes unloaded |
Indicates the number of classes currently unloaded from memory. |
Number |
|
Total classes loaded |
Indicates the total number of classes loaded into memory since the JVM started, including those subsequently unloaded. |
Number |