Infoblox Temperature Test
It is very important to monitor the appliance for temperature because if the temperature of the appliance reaches higher than the limit, it can cause both temporary and permanent damage to electronics. Sometimes temperature may be increasing despite fans working properly, so fan status may not be enough to ensure the proper functioning of the appliance. In these cases, administrators will be alerted and they can diagnose further to identify and fix the issue before appliance operation is impacted.
This test reports current temperature of CPU and system in the target Infoblox appliance. Using this test, administrators will always be aware of temperature movements and can take corrective actions even before the heat can harm other components or affect the functioning of the appliance.
Target of the test : An Infoblox appliance
Agent deploying the test : An external agent
Outputs of the test : One set of results for the Infoblox appliance that is to be monitored.
| Parameter | Description |
|---|---|
|
Test Period |
How often should the test be executed. |
|
Host |
The IP address of the Infoblox appliance for which this test is to be configured. |
|
Timeout |
Specify the duration (in seconds) within which the SNMP query executed by this test should time out in this text box. The default is 60 seconds. |
|
Is Debug Enabled |
By default, this flag is set to No. If you wish to obtain troubleshooting logs for this test, then, set this flag to Yes. The troubleshooting log with the naming convention <Component Name_Internal name of the test>.log will be created in the <eG_INSTALL_DIR>\agant\logs folder once the test starts reporting metrics. |
| Measurement | Description | Measurement Unit | Interpretation |
|---|---|---|---|
|
CPU temperature |
Indicates the current temperature of the CPU. |
Celsius |
|
|
System temperature |
Indicates the current temperature of the system. |
Celsius |
|