Processors - ESX Test

This test reports the CPU usage of each of the processors supported by the ESX host.

Target of the test : An ESX server host

Agent deploying the test : An internal/remote agent

Outputs of the test : One set of results for each processor supported by the ESX server host that is monitored

Configurable parameters for the test
  1. Test period - How often should the test be executed
  2. Host - The host for which the test is to be configured.
  3. port - The port at which the specified host listens. By default, this is NULL.
  4. esx user and esx password - In order to enable the test to extract the desired metrics from a target ESX server, you need to configure the test with an ESX USER and ESX PASSWORD. The user credentials to be passed here depend upon the mechanism used by the eG agent for collecting performance statistics from the ESX server and its VMs. These monitoring methodologies and their corresponding configuration requirements have been discussed hereunder:

    • Monitoring using the web services interface of the ESX server: Starting with ESX server 3.0, a VMware ESX server offers a web service interface using which the eG agent collects metrics from the ESX server. The VMware VI SDK is used by the agent to implement the web services interface. To use this interface for monitoring, this test should be configured with an ESX USER who has “Read-only” privileges to the target ESX server. By default, the root user is authorized to execute the test. However, it is preferable that you create a new user on the target ESX host and assign the “Read-only” role to him/her. The steps for achieving this have been elaborately discussed in section.

      ESX servers terminate user sessions based on timeout periods. The default timeout period is 30 mins. When you stop an agent, sessions currently in use by the agent will remain open for this timeout period until ESX times out the session. If the agent is restarted within the timeout period, it will open a new set of sessions. If you want the eG agent to close already existing sessions before it opens new sessions, then you would have to configure all the tests with the credentials of an ESX user with permissions to View and stop sessions (prior to vSphere/ESX server 4.1, this was called the View and Terminate Sessions privilege). To know how to grant this permission to an ESX user, refer to Creating a Special Role on an ESX Server and Assigning the Role to a New User to the Server section.

    • Monitoring using the vCenter in the target environment: By default, the eG agent connects to each ESX server and collects metrics from it. While this approach scales well, it requires additional configuration for each server being monitored. For example, separate user accounts may need to be created on each server for read-only access to VM details. While monitoring large virtualized installations however, the agents can be optionally configured to monitor ESX servers using the statistics already available with different vCenter installations in the environment.

    In this case therefore, the ESX USER and ESX PASSWORD that you specify should be that of an Administrator or Virtual Machine Administrator in vCenter. However, if, owing to security constraints, you prefer not to use the credentials of such users, then, you can create a special role on vCenter with ‘Read-only’ privileges.

    Refer to Assigning the ‘Read-Only’ Role to a Local/Domain User to vCenter section to know how to create a user on vCenter.

    If the ESX server for which this test is being configured had been discovered via vCenter, then the eG manager automatically populates the esx user and esx password text boxes with the vCenter user credentials using which the ESX discovery was performed.

    Like ESX servers, vCenter servers too terminate user sessions based on timeout periods. The default timeout period is 30 mins. When you stop an agent, sessions currently in use by the agent will remain open for this timeout period until vCenter times out the session. If the agent is restarted within the timeout period, it will open a new set of sessions. If you want the eG agent to close already existing sessions before it opens new sessions, then you would have to configure all the tests with the credentials of a vCenter user with permissions to View and stop sessions (prior to vCenter 4.1, this was called the View and Terminate Sessions permission). To know how to grant this permission to a user to vCenter, refer to Creating a Special Role on vCenter and Assigning the Role to a Local/Domain User section. When the eG agent is started/restarted, it first attempts to connect to the vCenter server and terminate all existing sessions for the user whose credentials have been provided for the tests.

    This is done to ensure that unnecessary sessions do not remain established in the vCenter server for the session timeout period.  Ideally, you should create a separate user account with the required credentials and use this for the test configurations. If you provide the credentials for an existing user for the test configuration, when the eG agent starts/restarts, it will close all existing sessions for this user (including sessions you may have opened using the Virtual Infrastructure client). Hence, in this case, you may notice that your VI client sessions are terminated when the eG agent starts/restarts.

  5. confirm password - Confirm the password by retyping it here.
  6. ssl - By default, the ESX server is SSL-enabled. Accordingly, the SSL flag is set to Yes by default. This indicates that the eG agent will communicate with the ESX server via HTTPS by default.

    Like the ESX sever, the vCenter is also SSL-enabled by default. If you have chosen to use the vCenter for monitoring, then you have to set the SSL flag to Yes.

  7. webport - By default, in most virtualized environments, the vSphere/ESX server and vCenter listen on port 80 (if not SSL-enabled) or on port 443 (if SSL-enabled). This implies that while monitoring an SSL-enabled vSphere/ESX server directly, the eG agent, by default, connects to port 443 of the vSphere/ESX server to pull out metrics, and while monitoring a non-SSL-enabled server, the eG agent connects to port 80. Similarly, while monitoring a vSphere/ESX server via an SSL-enabled vCenter, the eG agent connects to port 443 of vCenter to pull out the metrics, and while monitoring via a non-SSL-enabled vCenter, the eG agent connects to port 80 of vCenter. Accordingly, the webport parameter is set to 80 or 443 depending upon the status of the ssl flag.

    In some environments however, the default ports 80 or 443 might not apply. In such a case, against the webport parameter, you can specify the exact port at which the vSphere/ESX server or vCenter in your environment listens so that the eG agent communicates with that port.

  8. VIRTUAL CENTER - If the eG manager had discovered the target ESX server by connecting to vCenter, then the IP address of the vCenter server used for discovering this ESX server would be automatically displayed against the vIRTUAL center parameter; similarly, the esx user and esx password text boxes will be automatically populated with the vCenter user credentials, using which ESX discovery was performed.

    If this ESX server has not been discovered using vCenter, but you still want to monitor the ESX server via vCenter, then select the IP address of the vCenter host that you wish to use for monitoring the ESX server from the VIRTUAL CENTER list. By default, this list is populated with the IP address of all vCenter hosts that were added to the eG Enterprise system at the time of discovery. Upon selection, the ESX USER and ESX PASSWORD that were pre-configured for that vCenter server will be automatically displayed against the respective text boxes.

    On the other hand, if the IP address of the vCenter server of interest to you is not available in the list, then, you can add the details of the vCenter server on-the-fly, by selecting the Other option from the VIRTUAL CENTER list. This will invoke the ADD VCENTER SERVER DETAILS page. Refer to Adding the Details of a vCenter Server for Guest Discovery section to know how to add a vCenter server using this page. Once the vCenter server is added, its IP address, ESX USER, and ESX PASSWORD will be displayed against the corresponding text boxes.

    On the other hand, if you want the eG agent to behave in the default manner -i.e., communicate with each ESX server for monitoring it - then set the VIRTUAL CENTER parameter to ‘none’. In this case, the ESX USER and ESX PASSWORD parameters can be configured with the credentials of a user who has at least ‘Read-only’ privileges to the target ESX server.

  9. report summary - By default, this flag is set to No indicating that this test will not report the Summary of CPU usage across processors, by default. If you want to ensure that the test reports the CPU usage summary too, set this flag to Yes.
Measurements made by the test
Measurement Description Measurement Unit Interpretation

Physical CPU utilization:

Indicates the percentage of physical CPU used by this processor.

Percent

A very high value for this measure indicates excessive CPU utilization by the processor. The CPU utilization may be high because a few processes are consuming a lot of CPU, or because there are too many processes contending for a limited resource.

Physical CPU throttled

Indicates the percentage of  scheduling limit over a past minute.

Percent

 

Physical CPU used

Indicates the CPU usage in MHz of the VMware ESX host.

Mhz

 

CPU time used:

Indicates the time for which this processor was used.

Secs

Compare the value of this measure across processors to know which processor was used for the maximum time.

Core utilization:

Indicates the CPU utilization of the corresponding core in this processor.

Percent

A core is utilized if either or both of its logical CPUs are utilized.

Compare the value of this measure across processors to know if any processor is over-utilizing its core.

This measure is reported only if hyper-threading is enabled.

CPU utilization

Indicates the CPU usage of this processor during the last measurement period.

Percent

CPU utilization and Physical CPU usage might be different due to power management technologies or hyper-threading.