Impala Daemon Sessions Test
By tracking sessions in Impala Daemon server, administrators cannot only assess the load on the server, but can also quickly identify problematic sessions – these could be sessions that are closed, sessions that are expired, sessions that are inactive for some reason. This is what the Impala Daemon Sessions test does! This test monitors the sessions in the server, points administrators to overloaded server, and also reports the status of sessions in the server, so that problem sessions can be isolated and their problems can be investigated.
Target of the test : Apache Impala
Agent deploying the test : An internal/remote agent
Outputs of the test : One set of results for each session type in the target Impala Daemon server.
Parameter | Description |
---|---|
Test period |
How often should the test be executed. |
Host |
The IP address of the target server that is being monitored. |
Port |
The port number through which the Apache Impala communicates. The default port is 25000. |
Impalad URL |
Each daemon server has a different endpoint URL. You need to configure the eG agent with the endpoint URL of each daemon, so that the agent can access the URL and pull metrics on the health of the target daemon servers. Specify such URL in the Impalad URL text box . To know how to configure the eG agent with the API Endpoint URLs, refer to Configuring the eG agent with the API Endpoint URLs topic in Pre-requisites for Monitoring Apache Impala. |
Impalad Authorization type |
To access daemon server, you need to configure Digest authorization. Digest authorization is a method used to verify the identity of a user requesting access to API Endpoint URL of the daemon server. Digest authorization uses a combination of a username, password, and a unique message digest (a type of encrypted code). Specify such Digest authorization value in the Impalad Authorization type text box considering the below criteria:
If multiple Impalad URLs are mentioned in the Impalad URL text box, then specify a comma-separated list of authorization type for each URL. For example, if there are two Impalad URLs, one URL without authorization and the other URL protected with authorization (username/password authorization), then specify Impalad Authorization type as: no_auth,digest_auth in the Impalad Authorization type text box. By default, Impalad Authorization type value is no_auth. |
Impalad User, Impalad Password and Confirm Password |
Once you enable web server access to the eG agent, make sure that 'password authentication' is also enabled. This is needed, so that the eG agent is able to access the built-in web server for each daemon in a safe, secure manner. Configure the credentials of such a user against Impalad User and Password text boxes. Confirm the password by retyping it in the Confirm Password text box. To know how to configure the eG agent with 'secure' access to the built-in web server, refer to Configuring the eG agent with 'secure' access to the built-in web server topic in Pre-requisites for Monitoring Apache Impala. By default, Impalad user parameter is set to none.
|
Statestored URL |
Each daemon server has a different endpoint URL. You need to configure the eG agent with the endpoint URL of each daemon, so that the agent can access the URL and pull metrics on the health of the target daemon servers. Specify such URL in the Statestored URL text box . To know how to configure the eG agent with the API Endpoint URLs, refer to Configuring the eG agent with the API Endpoint URLs topic in Pre-requisites for Monitoring Apache Impala. |
Statestored Authorization type |
To access daemon server, you need to configure Digest authorization. Digest authorization is a method used to verify the identity of a user requesting access to API Endpoint URL of the daemon server. Digest authorization uses a combination of a username, password, and a unique message digest (a type of encrypted code). Specify such Digest authorization value in the Statestored Authorization type text box considering the below criteria:
By default, Statestored Authorization type value is no_auth. |
Statestored User, Statestored Password and Confirm Password |
Once you enable web server access to the eG agent, make sure that 'password authentication' is also enabled. This is needed, so that the eG agent is able to access the built-in web server for each daemon in a safe, secure manner. Configure the credentials of such a user against Statestored User and Password text boxes. Confirm the password by retyping it in the Confirm Password text box. To know how to configure the eG agent with 'secure' access to the built-in web server, refer to Configuring the eG agent with 'secure' access to the built-in web server topic in Pre-requisites for Monitoring Apache Impala. By default, Impalad user parameter is set to none.
|
Catalogd URL |
Each daemon server has a different endpoint URL. You need to configure the eG agent with the endpoint URL of each daemon, so that the agent can access the URL and pull metrics on the health of the target daemon servers. Specify such URL in the Catalogd URL text box . To know how to configure the eG agent with the API Endpoint URLs, refer to Configuring the eG agent with the API Endpoint URLs topic in Pre-requisites for Monitoring Apache Impala. |
Catalogd Authorization type |
To access daemon server, you need to configure Digest authorization. Digest authorization is a method used to verify the identity of a user requesting access to API Endpoint URL of the daemon server. Digest authorization uses a combination of a username, password, and a unique message digest (a type of encrypted code). Specify such Digest authorization value in the Catalogd Authorization type text box considering the below criteria:
By default, Statestored Authorization type value is no_auth. |
Catalogd User, Catalogd Password and Confirm Password |
Once you enable web server access to the eG agent, make sure that 'password authentication' is also enabled. This is needed, so that the eG agent is able to access the built-in web server for each daemon in a safe, secure manner. Configure the credentials of such a user against Catalogd User and Password text boxes. Confirm the password by retyping it in the Confirm Password text box. To know how to configure the eG agent with 'secure' access to the built-in web server, refer to Configuring the eG agent with 'secure' access to the built-in web server topic in Pre-requisites for Monitoring Apache Impala. By default, Impalad user parameter is set to none.
|
DD Frequency |
Refers to the frequency with which detailed diagnosis measures are to be generated for this test. The default is 1:1. This indicates that, by default, detailed measures will be generated every time this test runs, and also every time the test detects a problem. You can modify this frequency, if you so desire. Also, if you intend to disable the detailed diagnosis capability for this test, you can do so by specifying none against DD frequency. |
Detailed Diagnosis |
To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option. The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled:
|
Measurement | Description | Measurement Unit | Interpretation |
---|---|---|---|
Total sessions |
Indicates the total number of sessions in this session type. |
Number |
The detailed diagnosis of this measure provides details about the total sessions for Impala daemon like Session type, Open queries, Total queries, User, Delegated user, Session ID, Network address, Default database, Start time, Last accessed, Idle timeout(s), Expired, Closed and Reference count. |
Active sessions |
Indicates the number of active sessions in this session type. |
Number |
Sessions may be closed either when they are idle for some time (see Idle Timeout in DD for total session measure), or if they are deliberately closed, otherwise they are called active. |
Inactive sessions |
Indicates the number of inactive sessions in this session type. |
Number |
|
Expired sessions |
Indicates the number of expired sessions in this session type. |
Number |
A session is idle when no activity is occurring for any of the queries in that session, and the session has not started any new queries. Once a session is expired, you cannot issue any new query requests to it. The session remains open, but the only operation you can perform is to close it. |
Closed sessions |
Indicates the total number of closed sessions in this session type. |
Number |
|
Total queries |
Indicates the total number of queries executed for this session type. |
Number |
|
Opened queries |
Indicates the total number of open queries in this session type. |
Number |
|