Configuring Tests for Boomi AtomSphere
The eG Enterprise cannot automatically discover Boomi AtomSphere. This is why, you need to manually add a Boomi AtomSphere component to the eG Enterprise system to monitor it. The steps for manually adding the Boomi AtomSphere component are detailed below:
-
After adding Boomi AtomSphere component, you will be redirected to the Components page (see Figure 2). Using the options provided in the Components page, you can modify, unmanage or delete the newly added component. In addition, you can also configure the tests, set thresholds and maintenance policies, and change the IP address.
Figure 2 : Listing the newly added Boomi AtomSphere component
-
To collect the performance metrics, you may need to configure the tests that are mapped to the Boomi AtomSphere component. To configure the tests that need manual configuration, click on the
icon in Figure 2. -
Figure 3 then appears where the list of unconfigured tests will be listed in the UNCONFIGURED TESTS list box.
Figure 3 : The list of unconfigured tests for Boomi AtomSphere component
-
Click on any of the tests in Figure 3 to configure it. For instance, if you click on the Boomi Atom Web Server test, Figure 4 will appear. To know how to configure this test, refer to Boomi Atom Web Server Test
-
Click the Update button in Figure 4 to update the test configuration. This will automatically configure all the other unconfigured tests for the Boomi AtomSphere component.
