Infoblox Disks Test
This test monitors the target Infoblox appliance, and reports the space usage of every disk.
Target of the test : An Infoblox appliance
Agent deploying the test : An external agent
Outputs of the test : One set of results for the Infoblox appliance that is to be monitored.
| Parameter | Description |
|---|---|
|
Test Period |
How often should the test be executed. |
|
Host |
The IP address of the Infoblox appliance for which this test is to be configured. |
|
Timeout |
Specify the duration (in seconds) within which the SNMP query executed by this test should time out in this text box. The default is 60 seconds. |
|
Is Debug Enabled |
By default, this flag is set to No. If you wish to obtain troubleshooting logs for this test, then, set this flag to Yes. The troubleshooting log with the naming convention <Component Name_Internal name of the test>.log will be created in the <eG_INSTALL_DIR>\agant\logs folder once the test starts reporting metrics. |
| Measurement | Description | Measurement Unit | Interpretation |
|---|---|---|---|
|
Total capacity |
Indicates the total capacity of the disk. |
GB |
|
|
Available space |
Indicates the current free space available in the disk. |
GB |
|
|
Disk usage |
Indicates the percentage of space usage on the disk. |
Percent |
A value close to 100% can indicate a potential problem situation where applications executing on the appliance may not be able to write data to the disk(s) with very high usage. |